NC Linker
Easy setup and operation for sending and receiving!
NC programs can communicate (send and receive) between the computer and control devices.
- Company:システムアイ
- Price:10,000 yen-100,000 yen
Last Updated: Aggregation Period:Feb 04, 2026~Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Feb 04, 2026~Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Feb 04, 2026~Mar 03, 2026
This ranking is based on the number of page views on our site.
1~30 item / All 406 items
Easy setup and operation for sending and receiving!
NC programs can communicate (send and receive) between the computer and control devices.
Long-distance transmission without signal degradation is possible! 8-point signal transmission device VAD-D008R.L1.x using a single optical fiber cable!
Transmission using optical fiber supports long-distance transmission (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables the maintenance of signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, since transmission does not use electricity, it does not affect nearby devices that are susceptible to electromagnetic interference. Optical fiber cables can be connected using single-mode or multi-mode fibers, with ST connectors (various conversion connectors are also available). The VAD-D008R.L1.x transmits 8 channels of voltage/non-voltage contacts over single-mode fiber up to 30 km and multi-mode fiber up to 3 km. At the transmission destination, it outputs signals via non-voltage contact signals (relay output). Due to its card type design, it can be housed in a standalone installation case for installation in control panels or used in combination with multiple card types housed in a 19-inch rack mount chassis (optional).
Converter JAHD-ER03HR that converts HDMI signals to AHD signals! HDMI video signals can also be looped out!
The JAHD-ER03HR is a converter that converts HDMI video signals to AHD signals. - Converts HDMI signals to AHD signals - Maximum HDMI input resolution is 1080p (1920x1080) - HD signal output can be selected from 720p or 1080p - Enhances security when using AHD-compatible recorders - HDMI video signal can be looped out (audio is not output) - Allows installation of a monitor without needing an additional HDMI splitter, even if there is only one HDMI output on the device (using loop output) - Used in various scenarios, such as recording the operation screen of a PC that handles important information.
Transmit VGA video and audio from a single system over one optical fiber up to 10 km with FV5220C.LTX + FV2502C.LRX!
- Transmits a single VGA (analog RGB) signal up to 10 km using one single-mode fiber. - For multi-mode fiber, transmission is possible up to 1 km. - Transmission is done with a transmitter (FV5220C.LTX) and a receiver (FV2502C.LRX). - Long-distance transmission of high-resolution VGA video up to 1920x1080 at 60Hz. - Supports transmission of analog stereo audio. - The FV5220C.LTX has a built-in scaler function that allows conversion to 720p/1080p. - Power adapter included (DC12V 1A).
VAD-H102A.xx.35 that transmits AHD/HD-TVI/HDCVI/composite video and control signals over fiber optic up to 20 km!
The VAD-H102A.xx.35 transmits AHD/HD-TVI/HDCVI/composite video signals and RS232C + RS485 signals over a single fiber optic cable for distances of up to 20 km. The video is transmitted in digital format, ensuring no degradation in image quality. Additionally, it has a compact housing, making installation easy.
VAD-i800.xx for long-distance transmission of 8-channel composite video over a single optical fiber!
The VAD-i800.xx transmits 8 channels of composite video signals over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 1 km. The video is transmitted after digital conversion, ensuring no degradation in image quality.
Video converter JVCF-HS01 that converts SD/HD/3G-SDI signals and HDMI signals bidirectionally!
The JVCF-HS01 is a video converter that converts SDI signals and HDMI signals bidirectionally. - Bidirectional conversion between SDI signals and HDMI signals - Supports SD/HD/3G-SDI for SDI signals - Capable of 2-channel output for SDI signals - Automatically recognizes HDMI EDID information
Video converter JVCF-005PH that converts and outputs SDI signals to HDMI signals and composite signals!
JVCF-005PH is a video converter that converts and outputs SDI signals to HDMI signals and composite signals. HDMI signals and composite signals can be output simultaneously.
FO221xC.5BLxX for long-distance transmission of SD/HD/3G-SDI and RS485 signals over a single optical fiber!
FO221xC.5BLxX transmits SD/HD/3G-SDI and RS485 signals over a single-mode optical fiber up to 20 km and over a multi-mode optical fiber up to 2 km. It transmits using a transmitter (FO2211C.5BLTX) and a receiver (FO2212C.5BLRX). The FO2212C.5BLRX (receiver) can output the SDI signal to two distribution outputs.
HDMI multi-viewer HM41E that allows for the selection output of 4-system HDMI video or split display in any combination!
The HM41E is an HDMI 4-input video switcher/splitter that can split four HDMI video signals and display them on one screen (with six different display patterns). - It supports input signals up to 1920x1080 at 60Hz. - It allows for a mix of HDMI signals with different resolutions and frequencies. - Audio is compatible with LPCM 2.0 (audio playback is selectable and cannot be output simultaneously). - It can be operated via buttons on the front panel or an infrared remote control. - Automatic switching of displayed video is possible (with settings for intervals of 5 to 60 seconds). - It supports HDCP 1.2, HDMI 1.3a, and DVI 1.0. - Connected video devices are recognized as a maximum 1080p monitor. - A power adapter and infrared remote control are included. *Immediately after switching the display, the channel number, audio output status, and input resolution information will be shown in the OSD at the top left for 5 seconds. *When performing sequential display, the OSD will be displayed for 5 seconds each time it switches. *An option for the "HM41E" that does not display the OSD is also available for sale. Please specify "OSD non-display type" when ordering. (Changing from OSD non-display type to OSD display type after purchase will incur a fee.)
Optical transmission device ADR222.L1x that enables bidirectional transmission of voice/serial/contact signals over a single optical fiber!
The ADR222.L1.x allows for bidirectional transmission of 2 audio signals + RS232C + RS485 + 2 contact signals over a single optical fiber. - The optical fiber can transmit up to 20 km in single mode and up to 2 km in multi-mode. - Transmission is achieved by using ADR222.L1A (transmitter) and ADR222.L1B (receiver) in pairs. - Audio is digitally sampled at LINE level (unbalanced) at 96 kHz. - It has a wide operating temperature range of -20 to 75°C. - Up to 14 units can be housed in a 19-inch rack mount chassis "VAD-RACK-14-4U" for rack mounting installation. *Note: "ADR222.L1A" and "ADR222.L1B" are sold separately and not as a set.
VAD-SD001G.L1.xxx transmits 1 system Ethernet (10/100/1000M) over a single optical fiber up to 20 km.
VAD-SD001G.L1.xxx transmits a single Ethernet (10/100/1000M) signal up to 20 km away using a single optical fiber. The transmitted signal is not affected by electromagnetic waves generated by other devices or cables.
HDMI, VGA, and composite video to analog HD video converter JACT-ER03HRS!
The JACT-ER03HRS is a video converter that converts HDMI, VGA, and composite video signals to output AHD/HD-TVI/HDCVI.
This is a KVM extender that significantly improves the image quality adjustment range and extends VGA monitors, USB mice/keyboards up to 300 meters via LAN cable.
The UK330-TR is an extender that allows you to extend a monitor, mouse, and keyboard up to 300 meters using commercially available LAN cables. It displays the settings screen on the extended monitor, enabling adjustments to the picture quality (OSD: On Screen Display). EDID can also be obtained via the OSD. By using OSD settings, the range for picture quality adjustments has been significantly increased, allowing for broader adjustments in brightness, sharpness, and RGB color correction compared to previous models. As a result, it enables UXGA (1920×1200) display even at a maximum distance of 300 meters. The UK330-TR allows you to control the operation of the RX at the extension end using the TX select button. Additionally, you can connect a PC to the RX side, and by effectively utilizing these functions, you can manage and operate a remote PC near your regularly used PC. The UK330-TR comes with a PS2/USB conversion adapter. For PCs that operate with a PS2 mouse/keyboard, connect the included PS2/USB conversion adapter to the USB connector of the combined cable and use the PS2 connection on the combined cable for each PS2 connection.
Remotely operate a DVI monitor and mouse/keyboard, as well as USB devices, extending up to 20 km with optical cables and up to 152 m with LAN cables.
The SK-981DU is a dual-purpose extender equipped with both an optical module and a LAN port. The optical module supports 1LC (single-core) for both single-mode and multi-mode, while the LAN port uses Cat-5e/6, allowing for a maximum extension of 20km for optical and 152m for LAN. The included optical module is compatible with both single-mode and multi-mode. The maximum extension distance is 20km for single-mode and 2km for multi-mode. The supported resolution allows for full HD (1920×1080) display even at maximum extension. The SK-981DU enables PC sharing. By using a gigabit hub, it allows operation of PCs from multiple remote locations. The SK-981DU is a device that extends DVI monitors and USB mice/keyboards, but the receiver at the extension end can connect USB devices other than mice/keyboards. It is possible to mix with the SK-981HU (HDMI version).
This is a KVM extender that extends VGA monitors and USB mice/keyboards up to 300 meters via LAN cables. Serial devices can also be extended.
● The SK322-RA extends VGA monitor, mouse, and keyboard up to 300m using commercially available LAN cables. ● The extended monitor screen displays a settings menu, allowing for various configurations. EDID can also be obtained via OSD. ● The supported resolution can display Full HD (1920×1080) even at a 300m extension. ● The UK330-TR comes with a PS2/USB conversion adapter. ● It is equipped with RS232C, allowing for the extension of serial devices. ● It features audio and microphone ports.
This is a KVM extender that extends HDMI up to 400m using a LAN cable (1:1 or 1:many or many:many). 1920×1080.
The LK3080 is an extender that extends HDMI monitors and KB/mouse up to 400m via LAN cable. It can connect directly with CAT-6 for a maximum of 300m, and up to 400m via a HUB. It supports not only 1:1 connections but also distribution extension up to 1:8 and multi-to-multi connections of 8:8. The resolution supports up to MAX1920×1080 full HD. With IP connection, no image quality adjustment is needed for the extended monitor. It can be mounted on the wall.
Crane Monitoring Camera System (Sales and Rental Available)
● Compatible with a wide variety of cranes ● High-performance CCD camera adopted Equipped with a high-resolution 380,000 pixels and 480 horizontal resolution, upgraded lens quality, and measures against color temperature issues caused by sea surface reflections, designed with the site in mind. ● Outdoor housing The camera housing is all-weather type, resistant to wind and rain, made of stainless steel with a heat-resistant double structure and special waterproofing treatment, designed to minimize condensation. ● Camera section The camera body can move ±8 degrees in all directions, with iris and focus controlled automatically or manually. For more details, download the catalog!
Achieved size reduction and space-saving with amplifier modules compatible with parallel operation!
The "FS-2500 Series" is a rack-mounted emergency broadcasting system that can accommodate medium to large-scale properties with up to 500 stations and 640 lines, thanks to its highly expandable system configuration. Even in large and complex buildings, effective design with ample capacity is possible. Additionally, by using the emergency remote control I/F panel FS-2000RF, up to 16 emergency remote control panels can be connected. 【Features】 <Significant Space Saving> ■ Rack size is 1/2 compared to our FS-971 series ■ Size reduction of the operation unit achieved ■ Lineup includes amplifier modules compatible with parallel operation *For more details, please refer to the PDF document or feel free to contact us.
This is a lighting fixture optimized for Vitalight straight tubes (40W or 32W). It has a built-in electronic/inverter ballast.
Easily installed on a lighting duct rail, it provides the soft and uniform light of the full-spectrum fluorescent lamp VITA-LITE. It is ideal for prolonged detailed visual tasks and subtle color differentiation work. It is also recommended for lighting plants and animals. Features: 1. Easy installation without electrical work required 2. Built-in inverter stabilizer (voltage-free, lamp-free) 3. Effectively cuts flicker 4. Compatible with both 50Hz and 60Hz, so no issues when moving 5. Turns on instantly when needed 6. Eye-friendly light
A flat right-angle branching device that does not raise or lower the transported items!
The "F-RAT" is a flat right-angle branching device that adopts a run-on-demand method, driving only the necessary parts for transportation and branching. With the adoption of a new mechanism, it achieves a height of 150mm from the conveyor transport surface to the bottom. This allows for lower line heights, multi-tier configurations, and stacked workpiece transportation, thereby expanding its application in transportation. Additionally, it features all-electric control that eliminates the need for an air compressor, creating an environment free from noise and vibration. 【Features】 ■ Energy-saving ■ Creation of a comfortable space ■ Space-saving design ■ Simple structure ■ Reduced labor and easy wiring *For more details, please refer to the catalog or feel free to contact us.
Digmesa's CombiSensor can measure flow rate, temperature, and conductivity. It is a product in high demand in the water treatment field, such as in RO systems.
The CombiSensor is a compact sensor capable of measuring flow rate, temperature, and conductivity. Conductivity is temperature-compensated based on temperature and a correction factor of 2.25% per degree Celsius. It is equipped with an RS-485 interface (Modbus protocol), allowing for changes to the CombiSensor settings using standard Modbus functions. This product is in high demand in the water treatment field, such as in compact RO systems. ● Conductivity In recent years, conductivity as a measurement indicator has rapidly developed and become a common indicator of water quality. In fields such as water filtration, heating filling, and cooling circuits, it is recommended or legally required to establish conductivity thresholds. Furthermore, as units become more compact, there is an increasing need for conductivity measurements alongside temperature and flow rate for process control, leading to a demand for temperature-compensated conductivity meters.
Integrate control systems and information systems! Data can be easily saved just by configuring server design and logic tables.
"JoyWatcherSuite" is a development tool that allows for the easy construction of monitoring systems for various applications. It is possible to build large-scale monitoring systems ranging from individual machines and equipment to production factories, plants, and building facilities. By simply connecting to a PLC, setting the range of devices to be used, and configuring the type of devices, the connection setup is complete. 【Features】 ■ Simple redundancy function ■ Advanced graphics and animations ■ Over 600 types of rich components ■ High-functionality trend graph display ■ Event and alarm functions *For more details, please refer to the PDF materials or feel free to contact us.
An access control and thermal AI camera that can register up to 22,400 facial images and is equipped with body temperature check and facial recognition functions.
The "NSAC-TH1001" is an access control and thermal AI camera manufactured by NSS. It can register up to 22,400 facial images, and since temperature checks and facial recognition are logged, it is effective for daily temperature checks during office attendance. It can recognize staff even when they are wearing masks, eliminating the need to remove masks and saving time. By managing with facial recognition and ID, employees' faces can be used as employee IDs, preventing impersonation or transfer of employee IDs when managing access to specific areas. This allows for safe operations when integrated with security systems. If a temperature above the set threshold is detected, it can instantly notify with an image alert without contacting the individual, reducing the risk for those conducting the checks. It is suitable for companies and factories managing employee attendance. 【Features】 ■ High-performance AI equipped ■ Non-contact measurement capability ■ Up to 22,400 facial images can be registered ■ Security control through facial recognition ■ Usable for attendance management and more *For more details, please refer to the PDF document or feel free to contact us.
A thermal camera that achieves a high accuracy of ±0.5°C in measuring surface body temperature, easily operable via a touch panel, powered by AI (artificial intelligence).
The ASI7213Y-V3-T1 is an access control and thermal AI camera manufactured by NSS. It is a thermal AI camera that can be efficiently used at building entrances for monitoring entry and access. Thanks to AI (artificial intelligence), it achieves a high accuracy of body surface temperature measurement with an error margin of ±0.5℃. When a temperature above the set threshold is detected, it instantly notifies with an image alert without any contact with the subject, thereby reducing the risk for those conducting the checks. It can register up to 50,000 facial images, and both temperature checks and facial recognition are logged, making it effective for daily temperature checks of staff when entering the office. You can set it up using a computer. All log data is stored on the computer, including facial images. It can recognize individuals even while wearing masks, eliminating the need to remove masks and thus saving time and improving turnover rates. 【Features】 ■ Non-contact measurement ■ High accuracy with an error margin of ±0.5℃ ■ Easy installation with a dedicated stand ■ Recognizes even when wearing a mask *For more details, please refer to the PDF document or feel free to contact us.